Ultrafast energy-electron transfer cascade in a multichromophoric light-harvesting molecular square

A molecular square with dimensions of about 4 nm, incorporating sixteen pyrene chromophores attached to four ditopic bay-functionalized perylene bisimide chromophores, has been synthesized by coordination to four Pt(II) phosphine corner units and fully characterized via NMR spectroscopy and ESI-FTICR mass spectrometry. Steady-state and time-resolved emission as well as femtosecond transient absorption studies reveal the presence of a highly efficient (>90%) and fast photoinduced energy transfer (k(en) approximately equal to 5.0 x 10(9) s(-1)) from the pyrene to the perylene bisimide chromophores and a very fast and efficient electron transfer (>94%, k(et) approximately equal to 5 x 10(11) up to 43 x 10(11) s(-1)). Spectrotemporal parametrization indicates upper excited-state electron-transfer processes, various energy and electron-transfer pathways, and chromophoric heterogeneity. Temperature-dependent time-resolved emission spectroscopy has shown that the acceptor emission lifetime increases with decreasing temperature from which an electron-transfer barrier is obtained. The extremely fast electron-transfer processes (substantially faster and more efficient than in the free ligand) that are normally only observed in solid materials, together with the closely packed structure of 20 chromophoric units, indicate that we can consider the molecular square as a monodisperse nanoaggregate: a molecularly defined ensemble of chromophores that partly behaves like a solid material.     

Propagation of Gevrey singularities for solutions of linear differential operators with constant coefficients

Summary In [4]L. Hörmander has given sufficient conditions for propagation of C singularities for solutions of linear differential operators P with constant coefficients in terms of limit operators called «localization of P at infinity». In this paper a result (Theorem 1.2) of the same type concerning the propagation of Gevrey singularities is given.     

Reaction of Sulfene wild Heterocyclic N,N-Disubstituted α-Aminomethylene Ketones IV. Synthesis of 3,4-Dihydro-5H-[1]benzothiopyratio [3,4-e]-1,2-oxathiin and 2,3,6,7-Tetrahydro-5H-thiopyrano[3,4-e]-1,2-oxathiin Derivatives

The reaction of sulfene with N,N-disubstituted 3-aminomethylene-2,3-dihydro-4-thiochromanones and-2,3,5,6-tetrahydro-4-thiopyranones gave 1,4-cycloadducts which are derivatives of new heterocyclic systems, namely 3,4-dihydro-5H-[1]benzothiopyrano[3,4-e]-1,2-oxathiin and 3,4,7,8-tetrahydro-5H-thiopyrano[3,4-e]-1,2-oxathiin, respectively. Furthermore, some pyrazole derivatives VII and VIII were prepared from 3-hydroxymethylene-2,3-dihydro-4-thiochromanone or 2,3,5,6-tetrahydro-4-thiopyranone and hydrazines.     

First seco-C oleananes from nature

[structure: see text] The triterpenes 8,14-seco-oleana-8(26),13-dien-3beta-ol (1) and its acetyl derivative 2 were isolated from Stevia viscida and Stevia eupatoria, respectively. Their structures were elucidated by 2D NMR, including carbon-carbon connectivity experiments, and confirmed by X-ray diffraction analysis of ketone 3. The absolute configuration was determined by NMR analysis of the Mosher esters of 1. The biogenetic implications of the new substances are discussed.     

Reaction of dichloroketene and sulfene with N,N-disubstituted α-aminomethyleneketones. Synthesis of pyrano[2,3-e]indazole and 1,2-oxathiino[6,5-e]indazole derivatives

The polar 1,4-cycloaddition of dichloroketene to N,N-disubstituted (E)-5-aminomethylene-1,5,6,7-tetrahydro-(1-methyl)(1-phenyl)-4H-indazol-4-ones V, prepared from 1,5,6,7-tetrahydro-(1-methyl)(1-phenyl)-4H-indazol-4-ones via the 5-hydroxymethylene derivatives, gave in good yield N,N-disubstituted 4-amino-3,3-dichloro-4,5,6,7-tetrahydro-(7-methyl)(7-phenyl)pyrano[2,3-e]indazol-(3H)ones VI, which are derivatives of the new heterocyclic system pyrano[2,3-e]indazole. Dehydrochlorination of VI with DBN afforded N,N-disubstituted 4-amino-3-chloro-6,7-dihydro(7-methyl)(7-phenyl)pyrano[2,3-e]indazol-2(5H]-ones VII generally in satisfactory yield. Full aromatization with DDQ of VII was tried only in the case of dimethylamino derivatives, giving a moderate yield of 3-chloro-4-dimethylamino(7-methyl)(7-phenyl)pyrano[2,3-e]indazol-2(7H)-ones. Cycloaddition of sulfene to V occurred only in the case of aliphatic N-substitution to give in moderate yield 4-dialkylamino-4,5,6,7-tetrahydro-(7-methyl)(7-phenyl)-3H-1,2-oxathiino[6,5-e]indazole 2,2-dioxides, which are derivatives of the new heterocyclic system 1,2-oxathiino[6,5-e]indazole.     

A new pyridine-based 12-membered macrocycle functionalised with different fluorescent subunits; coordination chemistry towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II)

The coordination chemistry of the new pyridine-based, N2S2-donating 12-membered macrocycle 2,8-dithia-5-aza-2,6-pyridinophane (L1) towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II) has been investigated both in aqueous solution and in the solid state. The protonation constants for L1 and stability constants with the aforementioned metal ions have been determined potentiometrically and compared with those of ligand L2, which contains a N-aminopropyl side arm. The measured values show that Hg(II) in water has the highest affinity for both ligands followed by Cu(II), Cd(II), Pb(II), and Zn(II). For each metal ion considered, 1:1 complexes with L1 have also been isolated in the solid state, those of Cu(II) and Zn(II) having also been characterised by X-ray crystallography. In both complexes L1 adopts a folded conformation and the coordination environments around the two metal centres are very similar: four positions of a distorted octahedral coordination sphere are occupied by the donor atoms of the macrocyclic ligand, and the two mutually cis-positions unoccupied by L1 accommodate monodentate NO3- ligands. The macrocycle L1 has then been functionalised with different fluorogenic subunits. In particular, the N-dansylamidopropyl (L3), N-(9-anthracenyl)methyl (L4), and N-(8-hydroxy-2-quinolinyl)methyl (L5) pendant arm derivatives of L1 have been synthesised and their optical response to the above mentioned metal ions investigated in MeCN/H2O (4:1 v/v) solutions.     

A universal temperature controlled membrane interface for the analysis of volatile and semi-volatile organic compounds

A universal temperature controlled membrane interface (TCMI) has been constructed for hollow-fibre membranes. The membrane temperature is controllable in the range -70 to 250 degrees C using an electric heater and a flow of cooled nitrogen or helium gas. Volatile and semi-volatile organic compounds may be detected either by continuous diffusion across the membrane or by in-membrane pre-concentration followed by thermal desorption into the detector. The TCMI interface is demonstrated in combination with mass spectrometry and GC-MS, for the determination of VOCs and SVOCs in aqueous and air samples and for the on-line monitoring of a bioreactor.     

New taxane derivatives: synthesis of baccatin[14,1-d]furan-2-one nucleus and its condensation with the norstatine side chain

New taxanes 15 and 18, containing the unsaturated and saturated baccatin[14,1-d]furan-2-one nucleus, respectively, were prepared starting from the readily available 13-oxo-7-Tes-baccatin III (3). Sequential formation of the enolate of 3 and reaction with ethyl glyoxylate gave the 13-oxo-7-Tes-baccatin[14,1-d]-3,4-dehydrofuran-2-one 4. The reduction of 4 can result in the formation of a mixture of compounds corresponding to 13-hydroxy alcohol 5 and 13-enol derivative 6. Both 5 and 6 were transformed into 13-oxo-7-Tes-baccatin[14,1-d]furan-2-one 8 by treatment with a base. Further reduction of 8 gave 13-hydroxy compound 9. Esterification of 6 and 9 with N,O-protected norstatine 12, followed by deprotection, gave the new promising anticancer taxanes 15 and 18, respectively.     

Comparative receptor mapping of serotoninergic 5-HT3 and 5-HT4 binding sites*

The clinical use of currently available drugs acting at the5-HT₄ receptor has been hampered by their lack of selectivityover 5-HT₃ binding sites. For this reason, there is considerableinterest in the medicinal chemistry of these serotonin receptor subtypes, andsignificant effort has been made towards the discovery of potent and selectiveligands. Computer-aided conformational analysis was used to characterizeserotoninergic 5-HT₃ and 5-HT₄ receptorrecognition. On the basis of the generally accepted model of the5-HT₃ antagonist pharmacophore, we have performed a receptormapping of this receptor binding site, following the active analog approach(AAA) defined by Marshall. The receptor excluded volume was calculated as theunion of the van der Waals density maps of nine active ligands(pK_i 8.9), superimposed in pharmacophoric conformations.Six inactive analogs (pK_i < 7.0) were subsequently used todefine the essential volume, which in its turn can be used to define theregions of steric intolerance of the 5-HT₃ receptor. Five activeligands (pK_i 9.3) at 5-HT₄ receptors wereused to construct an antagonist pharmacophore for this receptor, and todetermine its excluded volume by superimposition of pharmacophoricconformations. The volume defined by the superimposition of five inactive5-HT₄ receptor analogs that possess the pharmacophoric elements(pK_i 6.6) did not exceed the excluded volume calculated forthis receptor. In this case, the inactivity may be due to the lack of positiveinteraction of the amino moiety with a hypothetical hydrophobic pocket, whichwould interact with the voluminous substituents of the basic nitrogen ofactive ligands. The difference between the excluded volumes of both receptorshas confirmed that the main difference is indeed in the basic moiety. Thus,the 5-HT₃ receptor can only accommodate small substituents inthe position of the nitrogen atom, whereas the 5-HT₄ receptorrequires more voluminous groups. Also, the basic nitrogen is located at ca.8.0 Å from the aromatic moiety in the 5-HT₄ antagonistpharmacophore, whereas this distance is ca. 7.5 Å in the5-HT₃ antagonist model. The comparative mapping of bothserotoninergic receptors has allowed us to confirm the three-componentpharmacophore accepted for the 5-HT₃ receptor, as well as topropose a steric model for the 5-HT₄ receptor binding site. Thisstudy offers structural insights to aid the design of new selective ligands,and the resulting models have received some support from the synthesis of twonew active and selective ligands: 24 (K_i(5-HT₃)= 3.7 nM; K_i(5-HT₄) > 1000 nM) and 25(K_i(5-HT₄) = 13.7 nM;K_i(5-HT₃) > 10 000 nM).     

Agro-industrial waste enzymes: Perspectives in circular economy

According to the Food and Agriculture Organization of the United Nations, approximately 1.3 billion tons of food is wasted each year, equivalent to approximately one-third of world production. Agri-food wastes are the source of proteins, carbohydrates, lipids, and other essential minerals that have been exploited for value-added products by the development of biorefineries and sustainable business as important elements of circular economies. The innovation and materialization of these types of processes, including the use of disruptive technologies on microbial bioconversion and enzyme technology, such as nanotechnology, metabolic engineering, and multi-omics platforms, increase the perspectives on the waste valorization process. Lignocellulolytic enzymes, pectinases, and proteases are mainly used as catalyzers on agri-food waste treatment, and their production in house might be the trend in near future for agro-industrial countries. Another way to transform the agri-food wastes is via aerobic or anaerobic microbial process from fungal or bacterial cultures; these processes are the key to produce waste enzymes.